| Package | Description |
|---|---|
| com.atid.lib.module.barcode.ssi.type |
| Class and Description |
|---|
| AustraliaPostFormat
To select one of the following formats for Australia Post,
|
| AztecInverse
This parameter sets the Aztec inverse decoder setting.
|
| BooklandISBNFormat
If Bookland EAN is enabled, select one of the following formats for Bookland data
- Bookland ISBN-10 / Bookland ISBN-13
|
| CodabarStartStopCharactersDetection
Select whether to detect upper case or lower case Codabar start/stop characters.
|
| Code11CheckDigitVerification
This feature allows the decoder to check the integrity of all Code 11 symbols to verify that the data complies
with the specified check digit algorithm.
|
| CodeLengthType
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains.
|
| CompositeBeepMode
To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
|
| CouponReport
Traditional coupon symbols (old coupon symbols) are composed of two bar codes: UPC/EAN and Code128.
|
| DataMatrixInverse
This parameter sets the Data Matrix inverse decoder setting.
|
| DecodeMirrorImages
Select an option for decoding mirror image Data Matrix bar codes (Data Matrix Only)
|
| DecodeUpcEanJanSupplementals
Supplementals are bar codes appended according to specific format conventions
(e.g., UPC A+2, UPC E+2, EAN 13+2).
|
| GS1DataBarLimitedSecurityLevel
The decoder offers four levels of decode security for GS1 DataBar Limited bar codes.
|
| HanXinInverse
This parameter sets the 1D inverse decoder setting.
|
| I2of5CheckDigitVerification
Enable this feature to check the integrity of all I 2 of 5 symbols to verify the data complies with either the
specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.
|
| I2of5SecurityLevel
Interleaved 2 of 5 bar codes are vulnerable to misdecodes by the nature of the symbol, especially when Any
Length is set for Interleaved 2 of 5 bar codes.
|
| IntercharacterGapSize
The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small.
|
| Inverse1D
This parameter sets the 1D inverse decoder setting.
|
| ISBTConcatenation
Select an option for concatenating pairs of ISBT code types
|
| LinearSecurityLevel
The 1D Barcode Scanner offers four levels of decode security for linear code types (e.g.
|
| MSICheckDigitAlgorithm
Two algorithms are possible for the verification of the second MSI check digit.
|
| MSICheckDigits
With MSI symbols, one check digit is mandatory and always verified by the reader.
|
| Preamble
Preamble characters are part of the UPC symbol, and include Country Code and System Character.
|
| QRInverse
This parameter sets the QR inverse decoder setting.
|
| QuietZoneLevel1D
This feature sets the level of aggressiveness in decoding bar codes with a reduced quiet zone (the area in front
of and at the end of a bar code), and applies to symbologies enabled by a Reduced Quiet Zone parameter.
|
| RedundancyLevel
The decoder offers four levels of decode redundancy.
|
| SecurityLevel
The decoder offers four levels of decode security for delta bar codes, which include UPC/EAN and Code 93.
|
| UpcCompositeMode
If you enable Composite CC-A/B , select an option for linking UPC symbols with a 2D symbol
during transmission as if they were one symbol
|
| UpcEanJanSupplementalAIMIDFormat
Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID
Character set to AIM Code ID Character:
|
| UpcEanSecurityLevel
The 1D Barcode Scanner offers four levels of decode security for UPC/EAN bar codes.
|